Cart 0
Treamill Lower Controller JDYF07L REVa (WJ28044T1) Motor controller for HORIZON FITNESS 841T 3 orders
Treamill Lower Controller JDYF07L REVa (WJ28044T1) Motor controller for HORIZON FITNESS 841T 3 orders
Treamill Lower Controller JDYF07L REVa (WJ28044T1) Motor controller for HORIZON FITNESS 841T 3 orders
Treamill Lower Controller JDYF07L REVa (WJ28044T1) Motor controller for HORIZON FITNESS 841T 3 orders
Treamill Lower Controller JDYF07L REVa (WJ28044T1) Motor controller for HORIZON FITNESS 841T 3 orders
Treamill Lower Controller JDYF07L REVa (WJ28044T1) Motor controller for HORIZON FITNESS 841T 3 orders

Treamill Lower Controller JDYF07L REVa (WJ28044T1) Motor controller for HORIZON FITNESS 841T 3 orders

 

 

Treamill Lower Controller JDYF07L REVa (WJ28044T1) Motor controller for HORIZON FITNESS 841T 3 orders

Please purchase the notes：

Please send us a clear picture of the old controller before / after purchase so that we can check and verify it, especially for the replacement of the controller, to avoid possible incompatibility due to different models of the new controller, thus causes your loss, the trouble you, thanks!

 

Package include:

JDYF07L REVa (WJ28044T1)  controller *1

warranty: 3 months

​The replacement controller can work good and tested before shipment, free return if this controller not work with your treadmill.

 

Replacement controller JDYF07L 110V/220V ↓

 

Controller type discrimination：

front

1 controller part number  

2 incline sensor connector ( if available)

3 speed sensor connector ( if available)   

4 display connector

5 transformer connector ( if availab） 

6 incline motor connector ( if available)

7 IC chips part number ( if available)

 

Please make sure that the motor is in working order before placing your order. How to identify whether the motor is in working order:HTB1rG9ZhDqWBKNjSZFAq6ynSpXal

 
 
Error code troubleshooting（Below info for your reference.）：

​E01: communication failure: console board and control board cannot communicate.probably console board issue or control board issue or data cable issue. replace a data cable,checking whether the machine can running? If no, Replace the control board.

 
E02: control board or motor issue. Test the motor first to check if the motor can runing normally. If motor is normal, replace the control board.
 
E03 : 1,Turn on the treadmill , motor running a few seconds then stop and console board shows E03, probably the Speed sensor issue.
2,Turn on the treadmill,motor can't runing and console board shows E03, probably the control board issue .Test the motor first to check if the motor can runing normally. If motor is normal:    1,replace speed sensor; 2,replace control board
 
E04 : generally over-current fault:components of control board has burned. replace burned components or replace control board.
 
E05:Current overload protection or Unstable speed.check the components on control board, if they connect normally? If not, re-plug the components or replace the control board.
 
E06 :Motor overload.Test the motor first to check if the motor can running normally. If motor is normal, replace the Current limiting resistor on control board or replace whole control board.
 
E07 :console board issue.replace console board cricuit board or replace data cable.
 

E08 : There may be a lift motor control fault.le)    

 

How we packege the parcel?how-to-package

 

 

 Payment ways

paymentway

Feedback

 

feedback